Live Edge Burls - Currently most without Legs
WGB01 - 11 images of this burl. {800x650x60 Burl, WG, red gum, no legs, many veins, great colour}
More burls in the full article WGB02, 03, 04, 05, 06, 07, 08, 09, 10, 11, 12, 13, 14, 15 and 18
Hall Tables, Corner Tables or Larger Burl Coffee Tables
HT01 {840x600x45 Red Gum Corner Hall Table, 90 degree corner, live edge, Oatley }
Large Burls for Coffee Tables
5 Medium Sized Live Edge Burls MB01 - MB05
MB01 - 12 images {950x740x62 th, 29kgs, Red Gum Medium sized very nice burl finished}
See the full article for images of burls MB02, 03, 04 and MB05
Small Sized Live Edge Burls - SB01 to SB05
SB01 {800x630x95 Red Gum small burl, fairly smooth curved edges, Oatley?}
For images of the other small burls SB02, 03, 04, 05, 06, and 07 see below.
This is a collection of small (labels SB01 to SB07) to medium sized burls (labels MB01 to MB05) that may have hairpin legs attached - or cast iron stands - for use as small side or coffee tables or hall stands.
Both faces have been milled, generally the upper surface has a finer finish and a larger area. Live edges have been retained. October 2023.
I recently salvaged some short lengths from a large Grey Gum tree that was approximately 70-90 years old.
After getting my chainsaw serviced, I cut these short lengths into "slices".
A number (about 30) of these slices were from a branch high up in the tree and are about 250-300mm across. Most are 25-60mm thick, have the edges rounded and will have a few coats of polyurethane applied. Apparently these have been used as centre pieces on tables at weddings etc.
A smaller number (less than 10) are cut from higher up the main trunk and are about 450-550mm across. I plan to make these into small side tables. We have one in the corner of a bathroom to put odds and ends on.
A few images of the work in progress with burls.
Finished burls have been milled and filled on both faces.
Most would be suitable for low coffee tables with either a central pillar cast iron legs - or with three or four black steel hairpin legs.
In several cases, the cracks and sap veins and other features may be not always filled to the top in order to maintain some of the character.
See images below:
I have crafted a number of small timber burl coffee tables - or side tables - as illustrated below
The top burls may be available for sale (Sydney or Southern Highlands pickup only) - get in touch by email if interested. The cast iron legs can be found on eBay.
Email: peter (a) peterkneen.photography
Using cast iron Paris styled legs these stylish coffee or hall tables look fantastic.
A few images of the work in progress with burls.
Finished burls have been milled and filled on both faces.
Most would be suitable for low coffee tables with either a central pillar cast iron legs - or with three or four black steel hairpin legs.
In several cases, the cracks and sap veins and other features may be not always filled to the top in order to maintain some of the character.
A few images of the work in progress with burls.
Finished burls have been milled and filled on both faces.
Most would be suitable for low coffee tables with either a central pillar cast iron legs - or with three or four black steel hairpin legs.
In several cases, the cracks and sap veins and other features may be not always filled to the top in order to maintain some of the character.
A few images of the work in progress with burls.
Finished burls have been milled and filled on both faces.
Most would be suitable for low coffee tables with either a central pillar cast iron legs - or with three or four black steel hairpin legs.
In several cases, the cracks and sap veins and other features may be not always filled to the top in order to maintain some of the character.
